GBR 76 SOE Replacement Motor Assembly

$895.00

Our modular design allows replacement of the interior motor assembly without needing to replace the outer enclosure.

Operating Range : 108 – 132 Volts AC RMS, 50/60 Hz, Single Phase

Max. Static Pressure: 16″ w.c. @ 0 CFM

Max. Airflow : 155 CFM @ 0″ w.c.

Built in speed control to customize performance.

Built in condensate bypass.

* GBR76 SOE and UD can be interchanged as long as correct voltage is being supplied.  Refer to operating ranges.

GBR 89 HA Replacement Motor Assembly

$1,395.00

Modular design allows inner motor assembly to be replaced without the need to replace the outer enclosure.

Operating Range : 216 – 264 Volts AC RMS, 50/60 Hz, Single Phase

Max. Static Pressure : 14″ w.c. @ 100 CFM

Max Airflow : 545 CFM @ 0″ w.c.

Built in speed control to customize performance.

Built in condensate bypass.

* 110v version available through special order.  Contact us for availability and pricing.

GBR 76 UD Replacement Motor Assembly

$1,095.00

Modular design allows replacement of the inner motor assembly without needing to replace the outer enclosure.

Operating Range : 100-240 Volts AC RMS, 50/60 Hz, Single Phase

Max. Static Pressure : 37″ w.c. @ 0 CFM

Max. Airflow : 195 CFM @ 0″ w.c.

Built in speed control to customize performance.

Built in condensate bypass.

* GBR76 SOE and UD can be interchanged as long as correct voltage is being supplied. Refer to operating ranges.

Wallmount2

GBR Wall Mount

$142.00

Sturdy, lightweight aluminum frame.

Provides up to 8″ of additional offset versus a direct wall mount.

Articulating design allows arm adjustment to conform to your installation needs.

Designed for use with our GBR76 SOE, GBR76 UD and GBR89 HA*.

Hardware included.

Obar GBR Wall Mount Technical Drawing

6x4coupling

4X6 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with HP220, FR150 and most other 6″ duct radon fans.

6X3 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with HP220, FR150 and other 6″ duct radon fans.

4x4coupling

4X4 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with GBR45, GBR45XL, RN2 and other 4″ duct radon fans.

4X3 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with GBR45, GBR45XL or most other 3″ and 4″ duct radon fans.

3x3coupling

3X3 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with most 3″ radon fans.

MufflerMuffler

Muffler

$83.00

Attaches directly to PVC pipe or fan duct with 4″ flexible coupling.

Quick and easy installation.

75% noise reduction with no back pressure.

18 1/2″ long X 6″ diameter.

 

Smoke Pen

Smoke Pen

$32.75

The Bjornax reusable Smoke Emitter Pen is the perfect tool to dispense just the right amount of test smoke, when and where it is needed. A patented smoke-emitting wick is inserted into the clutch pencil and ignited. You can adjust the wick to provide a continuous stream of a light gray to white smoke. The Smoke Pen can be easily extinguished by simply replacing the protective cover. Wick diameter is 5.6mm and will burn for approximately 30 minutes each.

This cool burning, non-toxic emitter is ideal for air balancing, verifying ventilation, testing smoke alarms, test for negative or positive air pressure.

Features:

  • Operates like a mechanical pencil.
  • The smoke and wick are non-toxic, with no shipping regulations
  • Excellent method to visualize airflow patterns
  • 6 wicks will provide up to 3 hours of continuous smoke or 360 individual 30 second tests
  • Steady and continuous smoke-stream, you decide smoke-duration
  • Non-turbulent smoke-stream = extremely low thermal interference
  • Helps to reveal the smallest leaks or air-current
  • Particle size is 0.3 to 2.5 microns
  • Does not contain oil, zinc, rubber powder or naphthalene

Obar Floor Port

$10.00

Obar floor ports are designed to be easily installed and are robust enough to handle typical building traffic.  These ports can be used as permanent sampling ports to fulfill vapor intrusion guidance document’s requirements.

Liberty 257 Sump Pump

$149.00

250-Series
1/3 hp Cast Iron Submersible Sump/Effluent Pump

1/3 hp.
1 1/2″ Discharge
1/2″ Solids Handling

Rugged and dependable heavy-duty cast iron pump with powder coat finish.

Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options – including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).

With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

Showing 1–16 of 50 results

3x3coupling

3X3 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with most 3″ radon fans.

4X3 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with GBR45, GBR45XL or most other 3″ and 4″ duct radon fans.

4x4coupling

4X4 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with GBR45, GBR45XL, RN2 and other 4″ duct radon fans.

6x4coupling

4X6 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with HP220, FR150 and most other 6″ duct radon fans.

6X3 Flexible Coupling

$8.99

Universal Pipe Connectors allow you to connect any size pipe, quickly and easily. Their time saving, fully tested design gives you professional results in minutes using only a slotted screwdriver or a 5/16″ nut driver or socket. Once installed, by tightening the stainless steel bands to 60″ lbs. torque, you are assured of a leak-proof, chemical resistant connection that is impervious to roots and unaffected by soil conditions.

Made in the U.S.A.

For use with HP220, FR150 and other 6″ duct radon fans.