Out Of Stock
Out Of Stock
GBR 76 SOE Replacement Motor Assembly
$945.00Our modular design allows replacement of the interior motor assembly without needing to replace the outer enclosure.
Operating Range : 108 – 132 Volts AC RMS, 50/60 Hz, Single Phase
Max. Static Pressure: 16″ w.c. @ 0 CFM
Max. Airflow : 155 CFM @ 0″ w.c.
Built in speed control to customize performance.
Built in condensate bypass.
* GBR76 SOE and UD can be interchanged as long as correct voltage is being supplied. Refer to operating ranges.
GBR 76 UD Replacement Motor Assembly
$1,145.00Modular design allows replacement of the inner motor assembly without needing to replace the outer enclosure.
Operating Range : 100-240 Volts AC RMS, 50/60 Hz, Single Phase
Max. Static Pressure : 37″ w.c. @ 0 CFM
Max. Airflow : 195 CFM @ 0″ w.c.
Built in speed control to customize performance.
Built in condensate bypass.
* GBR76 SOE and UD can be interchanged as long as correct voltage is being supplied. Refer to operating ranges.
GBR 89 HA Replacement Motor Assembly
$1,445.00Modular design allows inner motor assembly to be replaced without the need to replace the outer enclosure.
Operating Range : 216 – 264 Volts AC RMS, 50/60 Hz, Single Phase
Max. Static Pressure : 14″ w.c. @ 100 CFM
Max Airflow : 545 CFM @ 0″ w.c.
Built in speed control to customize performance.
Built in condensate bypass.
* 110v version available through special order. Contact us for availability and pricing.
GBR M Gauge
$43.000-3″ w.c. range works with the majority of radon installations.
Outdoor rated enclosure.
Simple installation and setup.
Weather resistant system labels included.
2′ of tubing for connection to system vent pipe.
GBR Roof Mount
$169.00Sturdy, lightweight aluminum construction.
Quick, easy assembly saves time over building Unistrut mounts.
Designed for use with our GBR76 SOE, GBR76 UD and GBR89 HA* Blowers.
Hardware included.
GBR Wall Mount
$142.00Sturdy, lightweight aluminum frame.
Provides up to 8″ of additional offset versus a direct wall mount.
Articulating design allows arm adjustment to conform to your installation needs.
Designed for use with our GBR76 SOE, GBR76 UD and GBR89 HA*.
Hardware included.
GBR-DPT Differential Pressure Transmitter 4-20mA
$89.00Differential Pressure Transmitter
Selectable ranges (0-1″, 0-2″ or 0-4″ w.c.)
4-20 mA Output
Wall mountable
GBR25-R Differential Pressure Gauge and Alarm
$125.00Vapor Intrusion and Radon System Alarm and Gauge
Measures pressures up to 40″ w.c.
Audible and visual alarm with adjustable set point
Plug and play operation*
Built-in alarm silence switch
Includes power supply and length of vacuum tubing for connection to riser pipe
Includes wiring for a second programmable relay
GBR25-T Differential Pressure Gauge/Alarm Transmitter
$155.000-40″ w.c. digital differential pressure gauge
Compatible with OBAR Instruments EDG Sensors and Gateways
LCD backlit display
0-10V and 4-20mA Outputs
Built in audible alarm with push to silence feature
LCD screen will flash and show an alert when value is out of range
Fully programmable for engineering units, delay, alarm set point and more.
Liberty 257 Sump Pump
$149.00250-Series
1/3 hp Cast Iron Submersible Sump/Effluent Pump
1/3 hp.
1 1/2″ Discharge
1/2″ Solids Handling
Rugged and dependable heavy-duty cast iron pump with powder coat finish.
Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options – including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).
With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.
Master Floor Port Installation Kit
$175.00Master Port Kit Includes:
- Rugged Case (Case type subject to change based on availability)
- 10 Ready to Install OBAR Floor Ports
- 7/8″ SDS Plus Masonry Drill Bit
- (2) 20mm Diamond Tipped Honing Drill Bits
- Port Installation Tool
- Replacement Port Parts/Hardware
- Installation Instructions
Minihelic Pressure Gauge 0-20″ w.c.
$49.95Differential Pressure Gauge
0-20″ w.c.
Minihelic Pressure Gauge 0-40″ w.c.
$49.95Differential Pressure Gauge
0-40″ w.c.